Showing 1553–1568 of 5526 results

  • 3 Core 14/.132mm(619) Grey Shielded Cable (10 Meter)

    215.00

    An electrical cable that has a common conductive covering wrapped around its conductors for electromagnetic shielding is known as a shielded cable or screened cable. The cable’s outermost layer often covers this shield. Foil type (hereafter: metallized film), contra spiraling wire strands (braided or unbraided), or both are the most widely used types of cable…

  • 3 Core 14/.132mm(619) Grey Shielded Cable (90 Meter)

    2,850.00

    An electrical cable that has a common conductive covering wrapped around its conductors for electromagnetic shielding is known as a shielded cable or screened cable. The cable’s outermost layer often covers this shield. Foil type (hereafter: metallized film), contra spiraling wire strands (braided or unbraided), or both are the most widely used types of cable…

  • 3 Core 23/0.0076 Flexible Wire(5 Meter)

    379.00

    It is a 3 Core 5 meter Flexible Wire (Power Cable) that has three separately insulated conductors i.e. (live, neutral and earth) required for good quality connections of any appliance. Specifically designed for home appliances like ceiling fans, wall fans, pedestal fans, LED lights, domestic tube fittings, flood lights, decorative lights, lamps, street lights, UPS, inverters,…

  • 3 Core 7/.153mm(609) Shielded Cable (10 Meter)

    238.00

    An electrical cable with a common conductive covering wrapped around its conductors for electromagnetic shielding is known as a shielded cable or screened cable. The cable’s outermost layer often covers this shield. Foil type (hereafter: metallized film), contra spiraling wire strands (braided or unbraided), or both are the most widely used types of cable shielding….

  • 3 Core 7/.153mm(609) Shielded Cable (90 Meter)

    2,307.00

    An electrical cable with a common conductive covering wrapped around its conductors for electromagnetic shielding is known as a shielded cable or screened cable. The cable’s outermost layer often covers this shield. Foil type (hereafter: metallized film), contra spiraling wire strands (braided or unbraided), or both are the most widely used types of cable shielding….

  • 3 dbi GSM Antenna For Landline

    117.00

    Its 3Dbi  Gain GSM Antenna for Landline.  It is Used for Both Voice and Data Wireless Application Systems. This GSM antenna provide TNC  male connector. This  Antenna provides Signal Enhancement Solutions for Fixed Wireless Phones, Data Terminals, Cellular Network Repeaters, mobile Signal Booster, and Rural Telephony Applications It is Used Within 800-950 Mhz. Features  It has Low Insertion…

  • 3 dbi GSM Magnetic Antenna With SMA Male connector

    109.00

    It’s a GSM magnetic base antenna with 3Dbi gain and SMA male connector. Its frequency range lies between 900-1800Mhz and its bandwidth is 70/170. This is a vertical polarization types magnetic base antenna whose maximum input power is 50W and input impedance is 50ohm. This antenna is commonly used in GSM repeater, GSM Module, GSM…

  • 3 dbi GSM Rubber Duck Antenna

    127.00

    It’s a 3Dbi gain GSM Rubber Duck Antenna.  It is Used for Both Voice and Data Wireless application Systems. Rubber Duck Wireless Lan Antennas Provide Broad Coverage With an Omni-directional Pattern. Its Rubber Duck Antenna provides Signal Enhancement Solution for Fixed Wireless Phones, Data Terminals, Cellular Network Repeaters, mobile Signal Booster and Rural Telephony Applications. It is…

  • 3 dbi SMA Male RA Antenna

    89.00

    It’s a 3Dbi SMA(m) RA antenna. This is a commonly used rubber duck- type GSM Antenna with a standard Right Angle SMA Male Connector. This is the antenna for GSM Modems. It is a small, high-quality, quad-band, standard SMA terminated, cellular antenna, which has a length of 2 inches. Features  Application: Wireless GSM communication Its connector…

  • 3 Digit Seven Segment Display- Green (Common Cathode)

    17.00

    A seven-segment display (SSD) is a type of electronic display device for displaying decimal numbers that is less complicated than dot matrix displays. The section is made up of seven LED lines or segments. The display’s parts light up in various configurations to display numbers from 0 to 9. The code or any encoder-decoder IC…

  • 3 in 1 Orange Pi Aluminum Heat Sink Set

    59.00

    It’s a 3-in-1 Orange Pi Aluminum Heat Sink Set. This is an aluminum metal hit sink which specially designed for Orange Pi PC Plus V1.1. The dimension of this heat sink is 14.5x10x6mm‚ 9.3×9.1×5.3mm‚ 14.4×14.1x6mm. It aids in thermal transfer‚ lowering the chance of hardware failure even when the Pi is overclocked. So you don’t have to worry…

  • 3 in 1 Raspberry pi Aluminium Heat Sink Set

    48.00

    It is a set of three Raspberry Pi heatsinks designed for use with Raspberry Pi 3 Model A/A+/B/B+ applications. The larger one will be utilised on the Broadcom CPU, while the smaller ones will be used on the Ethernet Controller IC. The third one serves as a backup. These high-quality aluminium Raspberry Pi heatsinks also…

  • 3 in 1 Type-C , Type-B Micro to Type-A USB OTG

    54.50

    It’s a USB hub product; you can get three USB types in one. It has a type-C USB to transfer data and power, one USB Type-B port to transfer power, and one USB type-A port too. It increases the data transferring rate. Its colour is silver and black. Features: Its colour is Silver Its used…

  • 3 LEDs Polycarbonate Lens for LED Base Plate

    25.00

    This is a 3 LEDs Polycarbonate Lens for LED Base Plate. A high-efficiency water clear power LED lens unit intended for use with the 3 x LED round modules. A material with excellent thermal stability is required. Polycarbonate resins offer superior thermal stability compared to acrylic resins and can be used for continuous temperatures up to…

  • 3 ohm (3R0) 5% SMD Resistor 0805 (Reel of 5000)

    441.00

    This is a BMC Components – SMD Resistor with a resistance of 3 ohm (3E). The resistor has a low tolerance of only 5%. The 3E SMD Resistor is a conventional thick film chip resistor and is a type of surface-mount resistor. SMD resistors in the 0805 package have a greater voltage rating. This electrode…

  • 3 ohm (3R0) 5% SMD Resistor 1206 (Reel of 5000)

    611.00

    This is a BMC Components – SMD Resistor with a resistance of 3 ohm (3E). The resistor has a low tolerance of only 5%. The 3E SMD Resistor is a conventional thick film chip resistor and is a type of surface-mount resistor. SMD resistors in the 0805 package have a greater voltage rating. This electrode…