Showing 1537–1552 of 5526 results
Solder wick is composed of copper threads braided together flat braid of thin and soft desoldering wire that has efficient thermal transmission. Removes solder faster with better heat response, Flux is normally added to help the solder flow from where it is not supposed to be (the jumper) to the wick. Specifications Material Copper Width…
The 2N2222 is an NPN bipolar junction transistor (BJT). Its used in low-power amplifying and switching applications. It is intended for low to medium current, low power, medium voltage, and relatively fast operation. Features: Its bipolar NPN transistor Its current gain is 300hFE Its collector current is 800mA Its emitter base voltage is 6V Specifications…
2N2907A is a semiconductor device used to amplify or switch electronic signals and electrical power. It is composed of semiconductor material usually with at least three terminals for connection to an external circuit. A voltage or current applied to one pair of the transistor’s terminals controls the current through another pair of terminals. Because the…
The 2N3904 is a common NPN bipolar junction transistor used for general-purpose low-power amplifying or switching applications. It is designed for low current and power, medium voltage, and can operate at moderately high speeds. It is complementary to the 2N3906 PNP transistor. Features: Its NPN transistor Its used in switching applications Its package is TO-92 Its…
Its PNP transistor, The PNP transistor is a type of transistor in which one n-type material is doped with two p-type materials. It is a device that is controlled by the current. Both the emitter and collector currents were controlled by the small amount of base current. Features Its used in portable radios Its mounting style is…
The 2N7000 is a N-channel enhancement mode Field Effect Transistor is produced using high cell density, DMOS technology. This very high density process has been designed to minimize on-state resistance while provide rugged, reliable and fast switching performance. Features: Small signal N-Channel MOSFET. Drain-Source Voltage (VDS) is 60V. Continuous Drain Current (ID) is 200mA. Pulsed Drain Current…
This is a 2S 2A LiFePO4 BMS Module. This is a double-cell Lithium Ion or Lithium Polymer battery charge and discharge protection module. It provides overcharge, over-discharge and overcurrent protection. The module is compact and can be fixed directly with the battery. Specifications Max. Continuous Discharge Current 2A Max. Continuous Charging Current 2A Operating Temperature…
This 2S 4A BMS Li-Ion Battery Protection Board With Nickel Strip is commonly used to manage and protect the battery from overcharge or discharge. It is very safe and reliable to use. This module provides short circuit protection; overload, discharge and overcharge protection. This little piece of equipment ensures the safety and protection of your…
BMS (Battery Management System) is designed to monitor the status of batteries, control the charging/discharging process, etc. Two 18650 batteries can be connected to the 2S BMS 8A charge-discharge controller module at the same time.The module has short-circuit, overcharge, and over-discharge protection. One of the charge controller’s functions is to turn off the power supply…
This is a High-Quality RB Colour SMD LED in a 2835 Package. These LEDs consume low power and generally produce a wide angle of light disbursement which can be narrowed through the use of external lenses. The Forward Voltage of Red is 1.8-2.1 volts and the Blue is 3.0-3.2 volts. SMD LEDs are substantially smaller than lead…
This is a High-Quality RG Colour SMD LED in a 2835 Package. These LEDs consume low power and generally produce a wide angle of light disbursement which can be narrowed through the use of external lenses. The Forward Voltage of Red is 1.8-2.2 volts and the Green is 3.0-3.2 volts. SMD LEDs are substantially smaller than lead…
This is a High-Quality RGB Colour SMD LED in a 2835 Package. These LEDs consume low power and generally produce a wide angle of light disbursement which can be narrowed through the use of external lenses. The Forward Voltage of Red is 1.8-2.1 volts, Green is 3.0-3.2 volts and the Blue is 3.0-3.2 volts. SMD LEDs…
The 2W10 is a Single Phase Bridge Rectifier . The maximum input AC RMS voltage of this IC is 700V hence can be used for a broad range of applications. The maximum average current this IC can handle is around 2A. This IC has a reverse breakdown voltage of 1000V and a low forward voltage…
It’s a Back to Back Holder Case for 2 AA Batteries The box is a wire-wrapped holder for two AA batteries. You can simply insert the battery in it because of the spring clip design. Approximate Wire Length: 140 mm Specification Battery Type AA Number of Batteries 2 Wire Length 140mm Colour Black Size 56x26x15.6mm…
