Showing 689–704 of 5526 results

  • 15mm x 17mm Black & Yellow Plastic Knob for 6mm Knurled Shaft Potentiometer

    8.16

    It’s a 15mm x 17mm Black & Yellow Plastic Knob for 6mm Knurled Shaft Potentiometer. 17mm Mini Black Plastic Knob with Yellow Pointer for Knurled Shaft Potentiometer with Plum Handle. Specification Material Plastic Shaft size 6mm Shaft Type Circular Knob Diameter 15mm Knob Height 17mm Country of Origin China

  • 15nF Ceramic Capacitor SMD 0805

    0.40

    Surface mount capacitors are basically the same as their leaded predecessors. This 15nF SMD capacitor uses surface mount technology and comes in a 0805 package. The multilayer ceramic SMD capacitors are the most used capacitors in electronics manufacturing industries. The multilayer ceramic SMD capacitor consists of a rectangular block of the ceramic dielectric. These capacitors have a maximum voltage…

  • 15nF Ceramic Capacitor SMD 0805 (Reel of 4000)

    1,801.00

    Surface mount capacitors are basically the same as their leaded predecessors. This 15nF SMD capacitor uses surface mount technology and comes in a 0805 package. The multilayer ceramic SMD capacitors are the most used capacitors in electronics manufacturing industries. The multilayer ceramic SMD capacitor consists of a rectangular block of the ceramic dielectric. These capacitors have a maximum voltage…

  • 15nF Ceramic Capacitor SMD 1206 (Reel of 4000)

    2,826.00

    Surface mount capacitors are basically the same as their leaded predecessors. This 15nF SMD capacitor uses surface mount technology and comes in a 1206 package. The multilayer ceramic SMD capacitors are the most used capacitors in electronics manufacturing industries. The multilayer ceramic SMD capacitor consists of a rectangular block of the ceramic dielectric. These capacitors have a maximum voltage…

  • 15S 48V 30A LiFePO4 Battery BMS Waterproof with Balance Charging

    2,059.00

    This is a 15S 48V 30A Lithium Battery Protection Board (PCM BMS) for balance charging. It uses an A-level protective integrated circuit IC. Its high load capabilities and 30A continuous discharge current performance make it a reliable solution for battery packs. It features a power Mosfet with a high voltage resistance and a low inner resistance….

  • 15S 48V 50A Lifepo4 Smart Battery Management System

    2,111.00

    LIKRAFT Lifepo4 15S 48V 50A is a BMS – A battery management system designed to monitor battery status and control the charging and discharging process.This charge-discharge controller module can accommodate a simultaneous connection of 15 rechargeable batteries in series. The module is protected from overcharge, over-discharge, and short circuits. When at least one battery reaches its…

  • 15V 10A SMPS 150W AC-DC Metal Power Supply

    1,250.00

    This is the switched mode power supply (SMPS) which convert 100-250V AC to 15V DC. It can provide upto 10A maximum current. All type of protections are provided in the supply. Two connected outputs are provided in the supply.  Features:  Output Over Voltage  Protection, Over Current Protection, Short Circuit Protection and Surge Protected output are…

  • 15V 5A SMPS 75W AC-DC Metal Power Supply

    958.00

    This is the switched mode power supply (SMPS) which convert 100-250V AC to 15V DC. It can provide upto 5A maximum current. All type of protections are provided in the supply. Two connected outputs are provided in the supply.  Features:  Output Over Voltage  Protection, Over Current Protection, Short Circuit Protection and Surge Protected output are…

  • 15W 230V 22mm Point Bit Soldering Iron

    44.00

    It is a 25w 220v/230v soldering iron. Soldering uses a filler metal with a low melting point, also known as solder, to join metal surfaces. The solder is usually made up of an alloy consisting of tin and lead .Solder is commonly used in, electronics, heating, air conditioning, mechanical, fire sprinkler and other similar systems…

  • 15W 230V 27mm Flat Bit Soldering Iron

    52.00

    It is a 25w 220v/230v soldering iron. Soldering uses a filler metal with a low melting point, also known as solder, to join metal surfaces. The solder is usually made up of an alloy consisting of tin and lead .Solder is commonly used in, electronics, heating, air conditioning, mechanical, fire sprinkler and other similar systems…

  • 16 MHz Crystal Oscillator

    5.00

    A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating crystal of piezoelectric material to create an electrical signal with a very precise frequency. This crystal oscillator generally use in different application like Resonance circuit, DIY projects, Electrical/electronic projects,  Clock generator for microcontrollers, DTMF decoder, 16 MHz Crystal. Specification…

  • 16 MHz Crystal Oscillator SMD

    9.00

    These 16MHz crystal oscillators are actually through-hole, but formed with a spacer to be surface-mount, and can be converted back to through-hole. A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating crystal of piezoelectric material to create an electrical signal with a very precise frequency. This crystal oscillator…

  • Placeholder

    16 Pin 2.54mm JST Female Cable Connector

    22.00

    NOT AVAILABLE

  • 16 Pin 2.54mm Relimate Female Cable Connector

    21.00

    NOT AVAILABLE

  • 16 Pin FRC Female Box Connector

    8.10

    This is a 16 Pin FRC Female Box Connector (8×2 Pin, 2.54mm Pitch) popularly used as the programming pin. This can be used to build your own AVR development tools or for general-purpose applications. It also prevents cable connection mishaps. It allows cost-effective connections between circuit boards based on a permanent connection (using a transition connector) or removable…

  • 16 Pin FRC Male Box Connector Right Angle

    5.00

    This is a 16 Pin FRC Male Box Connector Right Angle (8×2 Pin, 2.54mm Pitch) popularly used as the programming pin. This can be used to build your own AVR development tools or for general-purpose applications. It also prevents cable connection mishaps. It allows cost-effective connections between circuit boards based on a permanent connection (using a transition connector)…