Showing 4369–4384 of 5526 results
The LM336 integrated circuits are shunt regulators with a precision of 2.5V. The monolithic IC voltage reference operates as a 2.5V Zener with a low-temperature coefficient and a dynamic impedance of 0.2W. The LM336 has a third terminal that allows the reference voltage and temperature coefficient to be easily trimmed. The LM336-2.5 is a precision…
The LM339 consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible, as long as the difference between the two supplies is 2V to 36V, and VCC is at least 1.5 V more positive than the…
The LM358 is a dual op-amp IC that integrates two op-amps that are powered by a single power supply. It is one half of the LM324 Quad op-amp, which contains four op-amps with a shared power supply. The differential input voltage range can be the same as the power supply voltage range. The default input…
This amplifier module is based on the LM358 operational amplifier, which is a high-gain, frequency adjusted operational amplifier designed to operate across a wide voltage range from a single power source. It is utilised in standard operational amplifier circuits that require a single power rail to function. Features: 100 gain of the circuit design. 10K…
The LM35D Analog Temperature Sensor Module is a temperature sensor based on the LM35. The LM35 Linear Temperature Sensor module may be used to measure the temperature of the surrounding air. Temperature sensitivity is 10 millivolts per degree Celsius. The temperature has a direct relationship with the output voltage. The LM35 is a precision IC…
The LM386 Audio Amplifier Module has a 10K adjustable resistance. It is intended for use in low-voltage consumer applications. The gain is by default set to 20 to keep the external part count low, but a resistor and capacitor connected to pins 1 and 8 will increase the gain to any value between 20 and…
The LM386 is power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value from 20 to 200. The inputs are ground referenced…
The LM3914 is a monolithic integrated circuit that detects analog voltage levels and operates ten LEDs to create a linear analog display. With a single pin, the display transforms from a moving dot to a bar graph. The LEDs’ current drive is regulated and customizable, removing the need for resistors. This is a feature that…
The LM393 is made up of two independent precision voltage comparators with offset voltage specifications as low as 2.0 mV max for two comparators that were especially intended to work from a single power supply over a broad variety of voltages. It is also feasible to operate from split power supplies, and the low power…
LM393 Electret Microphone module uses LM393 as its main Op-Amp and is a single channel signal output sensor module. LM393 module has 3 pins which are Out, GND and VCC. GND is connected to the ground and VCC is connected to the positive terminal of the power supply. Out is an Output pin. Out pin…
The LM75-10D0512-30 power converter has two isolated outputs that can independently supply two different loads in the system that must be isolated from each other. The products are suitable for use in harsh working environments with ambient temperatures ranging from -30¬∞C to +70¬∞C, without the need for a fan for additional heat dissipation. The products…
The LM7805 series of three terminal positive regulators is available in the TO-220 package and with a variety of preset output voltages, making them suitable for a wide range of applications. Each kind incorporates internal current limiting, thermal shutdown, and safe operating area protection, making it almost unbreakable. They can provide more than 1A of…
The TO-220 package and a variety of preset output voltages make the LM7809 family of three terminal positive regulators suitable in a wide range of applications. Internal current limiting, thermal shutdown, and safe operating area protection are used by each kind, making it almost indestructible. They can provide more than 1A output current if appropriate…
The LM7905 series of three terminal negative regulators is available in TO-IC. with a variety of preset output voltages, making them suitable for a broad range of applications. Internal current limiting, thermal shutdown, and safe operating area protection are used by each kind, making it almost indestructible. Features: LM7905 is a Negative voltage regulator that…