Showing 113–128 of 195 results
MOC-3021 is a triac driver zero-crossing optocoupler. Optocoupler is made of light-emitting and light-sensing devices with no internal connection except light bean. The optoisolators allow two circuits to exchange signals without making any electrical connection. This device works on the principle that light is proportional to signal and signal is transferred to a phototransistor. Opto-isolators or…
The optocoupler belonging to the MOC8101, MOC8102, MOC8103, and MOC8104 family is an infrared gallium arsenide device. In a plastic plug-in DIP-6 package, an emitting diode is optically connected to a silicon planar phototransistor detector. The coupling device is appropriate for signal transfer between two circuits that are electrically isolated. The maximum allowable reference voltages…
The NE5532 operational amplifiers are high-performance devices with good DC and AC characteristics. Low noise, high output drive capacity, high unity-gain, and maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output short-circuit protection are all features. Internally, these operational amplifiers are calibrated to operate at unity gain. Maximum equivalent input noise voltage restrictions…
It’s a NE555 Precision Timers IC. This is 8 pin integrated circuit of timer IC which is used to generate clock signal for various application. These devices are precision timing circuits capable of producing accurate time delays or oscillation Features: Timing from Microseconds to Hours Astable or Monostable Operation These devices are precision timing circuits capable of…
The NE555 SMD is a Highly Stable Timer that can be used to generate precise time delays and oscillation. If desired, additional terminals are provided for triggering or resetting. One external resistor and capacitor accurately control the time in the time delay mode of operation. As an oscillator, it needs to be as stable as…
In one IC package, the 556 IC contains two distinct and independent timer circuits. It works in astable or monostable mode, and timing or delay can be modified with an external resistor-capacitor combination, just like the 555 timer IC. The NE556 dual monolithic timing circuit is a highly stable controller and capable of producing accurate time…
The HEF4094B NXP Semiconductor is a serial shift register with eight stages. Each stage has a storage latch for strobing data from the serial input to the parallel buffered 3-state outputs QP0 to QP7. The parallel outputs can be directly connected to common bus lines. On positive-going clock transitions, data is shifted. When the strobe…
The highly integrated current mode PWM control IC OB2269AP is designed for high performance, low standby power, and cost-effective offline fly-back converter applications with power levels above 20W. PWM switching frequency can be externally programmed and is reduced to a small range during regular operation. To reduce switching loss, the IC runs in extended ‘burst…
The FAN7392 is a monolithic high− and low−side gate drive IC, that can drive high−speed MOSFETs and IGBTs that operate up to +600 V. It has a buffered output stage with all NMOS transistors designed for high pulse current driving capability and minimum cross−conduction. ON Semiconductor’s high−voltage process and common−mode noise canceling techniques provide stable…
The FAN7392 is a monolithic high− and low−side gate drive IC, that can drive high−speed MOSFETs and IGBTs that operate up to +600 V. It has a buffered output stage with all NMOS transistors designed for high pulse current driving capability and minimum cross−conduction. ON Semiconductor’s high−voltage process and common−mode noise canceling techniques provide stable…
The MCT2E series optoisolators consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a 6-pin dual in-line package Features High Isolation voltage between input and output (Viso = 5000V rms) Creepage distance > 7.6mm Operating temperature up to +100°C Compact dual-in-line package Packed in tube or Tape and reel Conventional black…
The MCT2E series optoisolators consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a 6-pin dual in-line package Features High Isolation voltage between input and output (Viso = 5000V RMS) Creepage distance > 7.6mm Operating temperature up to +100°C Compact dual-in-line package Packed in tube or tape and reel The conventional…
This highly integrated PWM controller provides several special enhancements designed to meet the low standby power needs of low-power SMPS. The proprietary green-mode function provides off-time modulation to linearly decrease the switching frequency under light-load conditions to minimise standby power consumption. This green-mode function enables the power supply to meet even the strictest power conservation…
This highly integrated PWM controller provides several special enhancements designed to meet the low standby power needs of low-power SMPS. The proprietary green-mode function provides off-time modulation to linearly decrease the switching frequency under light-load conditions to minimise standby power consumption. This green-mode function enables the power supply to meet even the strictest power conservation…
Trimming at the wafer stage results in a very low input offset voltage (75 V maximum for OP07E). These low offset voltages obviate the requirement for external nulling in most cases. The OP07 also has a low input bias current (for the OP07E, 4 nA) and a high open-loop gain (200 V/mV). The OP07’s low…
PC814 Photocoupler IC has a transistor that is controlled based on light (photon). So this IC basically has a pair of two IR (infrared) LEDs connected in reverse polarity and a photo-transistor inside it. When the IR LED is powered the light from it falls on the transistor and it conducts. PC814 IC is used to…