Showing 81–96 of 195 results
-
₹25.00
The IL494 incorporates on a single monolithic chip all the functions required in the construction of a pulse-width-modulation control circuit. Designed primarily for power supply control, the IL494 contains an on-chip 5-volt regulator, two error amplifiers,an adjustable oscillator, a dead-time control comparator, a pulse-steering flip-flop, and output-control circuitry. The uncommitted output transistors provide either common-emitter or emitter-follower output capability. Push-pull or…
-
₹189.00
The HIP4082 is a medium frequency, medium voltage H-Bridge N-Channel MOSFET driver IC, available in 16 lead plastic SOIC (N) and DIP-packages. Specifically targeted for PWM motor control and UPS applications, bridge based designs are made simple and flexible with the HIP4082 H-bridge driver. With operation up to 80V, the device is best suited to…
-
₹132.98
The HIP4082 is a medium frequency, medium voltage H-Bridge N-Channel MOSFET driver IC, available in 16 lead plastic SOIC (N) and DIP-packages. Specifically targeted for PWM motor control and UPS applications, bridge based designs are made simple and flexible with the HIP4082 H-bridge driver. With operation up to 80V, the device is best suited to…
-
₹37.00
The NJM5532 is a high performance dual low noise operational amplifier. Compared to the standard dual operational amplifiers, such as the NJM1458, it shows better noise performance, improved output drive capability, and considerably higher small-signal and power bandwidths. This makes the device especially suitable for application in high quality and professional audio equipment, instrumentation, control…
-
₹38.20
The JRC2068 is a dual operational amplifier with high performance and low noise. This amplifier has a popular pin-out, excellent noise performance, and low total harmonic distortion. This amplifier also has significantly better noise performance with a higher gain-bandwidth product and slew rate than the 4558 type amplifier. The JRC2068 can be used in very…
-
₹11.00
The KA3525A is a monolithic integrated circuit that includes all of the control circuits necessary for a pulse width modulating regulator. There is a voltage reference, an error amplifier, a pulse width modulator, an oscillator, an under-voltage lockout, a soft start circuit, and the output driver in the chip. Features It can operate with a…
-
₹12.70
It’s a Fairchild KA3842B DIP-8 SMPS Controller. It’s a fixed frequency current-mode PWM controller. It is designed for Off-Line and DC-to-DC converter applications. It features a trimmed oscillator for precise duty cycle control, a temperature-compensated reference, a high gain error amplifier, and current sensing comparator. DATASHEET Features: Low Start up Current Maximum Duty Clamp UVLO…
-
₹24.00
L293D is a typical Motor driver that allows DC motors to drive in either direction. L293D is a 16-pin IC that can control a set of two DC motors simultaneously in any direction. Features It can be used to run Two DC motors with the same IC. Speed and Direction control is possible In this, automatic…
-
₹75.00
It’s a L293d motor driver module. This motor driver module operate on 4.5v to 12v dc. It has maximum load current 600mA per motor. This module generally use for drive motor which is generally use in DIY project . Specification- Operating Voltage(VDC) 4.5 to 12 V Max current 600 mA per rotor Country of Origin…
-
₹179.00
This L293ESP Node MCU Motor Driver Shield is suitable for controlling a motor from a distance using a wireless connection. It is designed with a socket for connecting WiFi ESP8266 plates. The ESP12E Dev Kit and Node MCU are both compatible with the L293D Motor Driver Shield. This shield board is powered by the L293D powerful…
-
₹26.00
The LF347 Quad J-FET Operational Amplifier are high speed J–FET input quad operational amplifiers incorporating well matched, high voltage J–FET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset currents, and low offset voltage temperature coefficient. Features Low power consumption Wide common-mode (up to VCC+)…
-
₹149.27
It is a Dual Operational Transconductance Amplifiers With Linearizing Diodes and Buffers. Each of the two current 2 regulated transconductance amplifiers in the LM13700 series has differential inputs and a push-pull output. The two amplifiers share a common power supply but are otherwise independent.At the inputs, linearizing diodes are used to reduce distortion and allow…
-
₹163.00
It is a Dual Operational Transconductance Amplifiers With Linearizing Diodes and Buffers. Each of the two current 2 regulated transconductance amplifiers in the LM13700 series has differential inputs and a push-pull output. The two amplifiers share a common power supply but are otherwise independent. At the inputs, linearizing diodes are used to reduce distortion and…
-
₹3.50
LM324 is a Quad op-amp IC integrated with four op-amps powered by a common power supply. The differential input voltage range can be equal to that of the power supply voltage. The default input offset voltage is very low which is of magnitude 2mV. The operating temperature ranges from 0˚C to 70˚C at ambient whereas…
-
₹5.00
These devices are made up of four separate high-gain frequency-compensated operational amplifiers that are meant to operate from a single power source across a wide voltage range. Split-supply operation is also allowed if the voltage difference between the two sources is 3 V to 32 V (3 V to 26 V for the LM2902) and…
-
₹5.00
The LM339 consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible, as long as the difference between the two supplies is 2V to 36V, and VCC is at least 1.5 V more positive than the…